INTRODUCTION
Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda single board computer and you have a visual user interface for your project – no extra power cables required! The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. The picture below shows a LattePanda directly powering the 7″ display.
Note: LattePanda uses a custom MIPI pinout that will not be compatible with alternative IPS displays! You can still use HDMI out. Use your display in conjunction with the capacitive touch panel (not included) to get a touch interface for your project!
NOT compatible with LattePanda Alpha and Delta edition
SPECIFICATION
- 7″ IPS display
- 1024 x 600 high resolution
- Dimensions: 164.0mm x 96.0mm x 2.6mm
- Supports LattePanda
- 10cm FPC connector
DOCUMENTS
SHIPPING LIST
- 7″ 1024 x 600 IPS Display x 1
PROJECTS
Project 1. Hyduino – Automated Hydroponics with an Arduino
hydroponics is growing plants without the use of a traditional dirt medium by using a nutrient rich water solution. This is especially great for those people that that have limited areas in their backyard to grow in.
Hardware list:
- Arduino Mega 2560
- Peristaltic Pumps (2)
- Regular Pump
- pH Electrode Probe and Connection to Arduino
- 5V Relay Modules for Arduino
- 12V Solenoid Valve
- DHT11 or DHT21 or DHT22 Humidity/Temperature Sensor
- Photosensitive Sensor for Arduino
- Breadboard
- Various Wires
- Grow Lights (mine are LED)
- Sockets for Grow Lights
- 3.2″ TFT LCD Shield + Touch Screen (usually has an SD card reader on the back of it)
- Water Level Sensor Float Switch (2)
- I2C RTC DS1307 AT24C32 Real Time Clock Module
- 9V and 12V Power Supplies
- Hydroponics Pots (I’m using 10 – 3″ pots for this)
- 1″ PVC Pipe and Fittings + Drain Pipe and Fittings
pH Up/Down Solution
