7″ 1024 x 600 IPS Display for LattePanda

INTRODUCTION

Add exciting new dimensions to your project with this large full-color display. All you need to do is power your LattePanda single board computer and you have a visual user interface for your project – no extra power cables required! The border of the display is insulated with black tape so that even without and enclosure there is no possibility of a short-circuit. The picture below shows a LattePanda directly powering the 7″ display.

7

Note: LattePanda uses a custom MIPI pinout that will not be compatible with alternative IPS displays! You can still use HDMI out. Use your display in conjunction with the capacitive touch panel (not included) to get a touch interface for your project!
NOT compatible with LattePanda Alpha and Delta edition

SPECIFICATION

  • 7″ IPS display
  • 1024 x 600 high resolution
  • Dimensions: 164.0mm x 96.0mm x 2.6mm
  • Supports LattePanda
  • 10cm FPC connector

DOCUMENTS

SHIPPING LIST

  • 7″ 1024 x 600 IPS Display x 1

PROJECTS

Project 1. Hyduino – Automated Hydroponics with an Arduino
hydroponics is growing plants without the use of a traditional dirt medium by using a nutrient rich water solution. This is especially great for those people that that have limited areas in their backyard to grow in.
Hardware list:

https://www.dfrobot.com/product